Latest News     Installation Service

 

Home Introduction Product Test Gallery Training Market Opportunity Question ? Contact Us


Believe It or NOT ? 

Now you can make yourself BULLET and EXPLOSION resistance glass / door / wall with Simple steps D.I.Y.

 

With STEC 1Armour and Ballistic resistance laminates and shield, you can turn your existing door / window glass into BALLISTIC level. Protects you and your belonging from Bullet, Explosion, Robbery, Hijack, Smash, Flying stone, Petrol Bomb, etc.

 


STEC 1 Armour Ballistic Shield and Laminates

Questions and Answers

Here you will find most frequently ask questions. if what you have in mind is not listed here, please send us an email.

 

1. What is STEC 1 Armour laminates?

2. What type of guns and bullets can STEC 1 Armour withstands?

3. What are the differences between STEC Armor proof sheet, STEC Bulletproof sheet and Bulletproof glass?

4. How to install STEC armored proof laminates and STEC bulletproof sheet.

5. How long does it takes to dry the film after installation?

6. What are the equipments require for the installation?

7. Do I need a special knowledge to install the film on glass.

8. What is the duration or endurance of the laminates property?

9. Do I still need additional glass protection beside STEC laminates / sheet on glass?

10. Can I cut the laminates to specific design like flower for decoration on glass and yet obtain the security level

11. Do we need to install the laminates right inside the frame of window or door?

12. What are the differences between STEC Laminates compare with others in market?

13. Can Armor proof  laminates / bulletproof sheet install on Vehicles?

14. Why immediately after installation, the laminates still can be peeled off easily and like not sticking at all?

15. Is there anyway to shorten the drying period and allow it to stick well on glass?

16. Sample.

17. What is the lead time for purchase?

18. How can we apply for Regional or Sole Country distributor?

19. What is the minimum requirement for Regional and Sole Country Distributor?

20. How many cars could install with One Roll of STEC Armor proof laminates?

21. How many color does STEC has?

22. Can we apply another solar film on top of STEC laminates? and how?

23. After applying the laminates,  some water mark can be seen. How to remove it?

24. If some air bubble occur after few days. How to remove it?

25. As for STEC Bulletproof sheet, as the sheet is so thick, how can we cut it after order the standard size?

26. Do you provide the way and method on how to stick the STEC Bulletproof sheet onto the glass as the sheet is quite thick.

27. Can we order different sizes or special sizes for the Bulletproof sheet?

28. Does the Bulletproof sheet comes with the adhesive or we need to apply the adehesive?

29. Do we need some special chemical solution to apply the sheet or laminates?

30. Usually how long does it take to install one car, say 4 side window with the Bulletproof sheet?

31. Can I install the Bulletproof sheet at the front and rear windscreen?

32. As for building, can I install bulletproof sheet on my existing glass or do I need to change the glass?

33. For the Bulletproof glass, how can we order?

34. Seems the Bulletproof glass comes with stainless steel frame, how can we install it to our existing window.

35. If the customer require bulletproof level without changing the glass or require messy renovation, how can we do it?

 

Bulletproof Sheet - BS

36. How can we order the bulletproof sheet? In piece form?

37. If we require bigger size then the standard size, would it be possible? Sheet, Shield and Glass.

38. Seems the bulletproof sheet is quite thick, what are the device we need to us for cutting.

39. The bulletproof sheet, one we cut into shape, we just need to use water and spray in the adhesive layer and stick it?

40. Is the any color for the bulletproof sheet?

 

Bulletproof Shield - BPS

41. As for the bulletproof shield, the standard size is 1.2mx1.6m, is it enough to cover for the whole car?

42. Please advise what are the device we can use to cut the bulletproof shield into shape?

43. After cut into shape of the BPS, how we could install into the car door?

44. Can the BPS material install at the car roof or rear door (5th door)?

45. How we could use the BPS for other purpose such as Chemical storage cabinet, wall or room?

 

Bulletproof Glass

46. Can we order bigger size for the bulletproof glass such as 4 x 8 feet?

47. Seems the glass comes with frame, how could we install it.

48. Is the dimension, for example 4 x 8 include frame?

49. Is there any color available for example dark, gray or green?

50. If you require other frame rather then stainless steel, would it be possible?

51. If we do not wish to dismantle the current window frame or glass, can we install the bulletproof glass as additional protection.

52. If we require the bulletproof glass to make it a door, would it be possible to comes with the lock?

 


 

 

1. What is  STEC  1 armour laminates ?

STEC laminates is a Class A Super Optical Clear and Tough PET material with special formulated strong adhesive (HIRA).

(Back to TOP)

 

2. What type of guns and bullets can STEC 1 Armour withstand?

From handgun to rifle and bomb depends on glass thickness and model use.

(Back to TOP)

 

3. What are the differences between STEC Armor proof sheet, STEC Bulletproof sheet and Bulletproof glass ?

STEC armor proof laminates come in form of roll.

STEC bulletproof sheet is much thicker than STEC armor sheet. Comes with standard sizes in piece form.

STEC bulletproof glass is combination between STEC bulletproof sheet and glass. Comes with stainless steel frame, Ready to use.

(Back to TOP)

 

4. How to install STEC armored proof laminates and STEC bulletproof sheet.

Once you have become our dealer, STEC provides ready made training manual and video.

(Back to TOP)

 

5. How long does it takes to dry the laminates after installation?

During installation of film on glass surface, water is use to provide flexibility during installation. Thus water moisture and air bubble is captured between glass surface and film.

 

To have it 100% effective, the water moisture between the glass and film needs to be totally dried off and allow the adhesive to stick hard on glass. In normal condition or room temperature, it requires at least 30 days for total dry up. If hot gun n blower is used, then the drying time is shorter.

(Back to TOP)

 

6. What are the equipments required for the installation of STEC laminates and sheet?

In installation of the film, you would require:

* Water sprayer

* Stationary blade (Thin type)

* Ruler

* Hard Water Squeezer to remove water and air bubble

* Clean cotton cloth

* For more information and learning skill, please contact us for procedures and video demo.

(Back to TOP)

 

7. Do I need special knowledge to install the film / laminates on glass.

Yes, only basic knowledge required. To learn on installation, please contact us for procedures and video demo.

(Back to TOP)

 

8. What is the duration or endurance of the laminates property?

5 years warranty on material property. However, the laminates will last as long as the glass last, Thus, it is almost eternity.

(Back to TOP)

 

9. Do I still need additional glass protection beside STEC laminates / sheet on glass?

STEC laminates is tough enough to withstand any great impact which may penetrate the glass. Thus, with STEC laminates, you do not need other glass protection material. It makes penetration to be very difficult or to almost impossible.

(Back to TOP)

 

10. Can I cut the laminates to specific design like flower for decoration on glass and yet obtain the security level?

No...it needs to cover the whole glass without any punctual on its combination strength.

(Back to TOP)

 

11. Do we need to install the laminates right inside the frame of window or door?

No....STEC Laminates only need to install on the visible surface of glass, Does not need to dismantle the frame. But the glasses require frame to hold the glass, It will be weaken if install on glasses without frame. For explosion proof level, installation is require to the edge of the glass covered by the frame. Which means film should go inside the frame. You can use anchoring system as well to hold the laminates to the window frame.

(Back to TOP)

 

12. What are the differences between STEC Laminates compare with others in market?

Not all lamiantes can be armored proof, bulletproof or explosion proof. It requires special Adhesive, Process and Know How in order to achieve high level protection against heavy weapons and explosive.

(Back to TOP)

 

13. Can Armor proof  laminates / bulletproof sheet install on Vehicles?

Yes, it can be installed on Vehicle glasses for the purpose of protection against Burglary, Smash and Grab, Explosion, Stone throwing, Light handgun, explosion, etc.

(Back to TOP)

 

14. Why immediately after installation, the laminates still can be peeled off easily and like not sticking at all?

Yes, because there is still water moisture in between the glass and laminates. It requires at least 30 days in total cure at room temperature.

(Back to TOP)

 

15. Is there anyway to shorten the drying period and allow it to stick well on glass?

Yes, Use hair dryer or Industrial Hot gun blower. Blow at the laminates and back glass surface for at least 30 minutes daily.  This will shorten the cure by 7 ~ 14days. Do not use any hair dryer or heat generating equipments to dry off the surface, this will damage the film property.

(Back to TOP)

 

16. Sample.

Distributor are requested to buy sample for test.

STEC do not provide free sample. This is our standard policy.

(Back to TOP)

 

17. What is the lead time for purchase?

20 ~ 30 days of production time. If we have immediate stock, minimum of 10 days is require for delivery process. Depends on quantity as well.

(Back to TOP)

  

18. How can we apply for Regional or Sole Country distributor?

Please write to us and check whether the distributorship for your area has been taken or still available.

Contact us at: info@securityfilm.biz.

(Back to TOP)

 

19. What is the minimum requirement for Regional and Sole Country Distributor?

Please write to us for further discussion at: sales@securityfilm.biz

(Back to TOP)

 

20. How many cars could install with One Roll of STEC Armor proof laminates?

As our standard roll dimension is 1525mm x 30 meter, please divide it to the total glass dimension on the vehicle

with an allowance of 10 ~ 15% for wastages at corner or shape forming. In average for 4 windows with single layer, it is about 18 cars.

(Back to TOP)

 

21. How many color does STEC has?

Our standard laminates are clear, no color is available due to lack of demand in color. However, special order of minimum 200 rolls can be arranged, such as Gray, Charcoal, Black, etc.

(Back to TOP)

 

22. Can we apply another solar film on top of STEC laminates? and how?

Yes you can install other color solar film on top of STEC laminates after 3 days. If immediate installation is require, please consult us.

(Back to TOP)

   

23. After applying the laminates,  some water mark can be seen. How to remove it?

Water mark can appear after installation. However, it will disappear by itself automatically by time. Approximately 4 ~ 8 weeks.

Expose the glass to direct sun would help the water mark or small bubble to dry off in shorter time.

(Back to TOP)

 

24. If some air bubble occur after few days. How to remove it?

Bubble should not occur during installation. If it happens after few days, it will disappear by time after the glass is exposed to sun light.

Usually is after 30 days.

(Back to TOP)

 

25. As for STEC Bulletproof sheet, as the sheet is so thick, how can we cut it after order the standard size?

We will teach you the way to cut it. Nothing is difficult. It has been made simple.

(Back to TOP)

 

26. Do you provide the way and method on how to stick the STEC Bulletproof sheet onto the glass as the sheet is quite thick.

Yes, we do have simple step by step method to assist you and make your job simple.

(Back to TOP)

 

27. Can we order different sizes or special sizes for the Bulletproof sheet?

Yes, it is possible. However, if you have the quantity, we can do it. Too small order is quite difficult.

(Back to TOP)

 

28. Does the Bulletproof sheet comes with the adhesive or we need to apply the adehesive?

It comes with the adhesive build in.

(Back to TOP)

 

29. Do we need some special chemical solution to apply the sheet or laminates?

No and Yes. We will teach you to make the solution yourself.

(Back to TOP)

 

30. Usually how long does it take to install one car, say 4 side window with the Bulletproof sheet?

With average technical experience in window tinting, it only takes about 4 hours.

(Back to TOP)

 

31. Can I install the Bulletproof sheet at the front and rear windscreen?

It is quite difficult as it is very thick. However, it is not impossible.

(Back to TOP)

 

32. As for building, can I install bulletproof sheet on my existing glass or do I need to change the glass?

It al depends on your protection level requirement. If for small arm, no need to change the glass. If higher weapons, additional glass is require. We will teach you how. Don't worry, we have all the experience you need.

(Back to TOP)

 

33. For the Bulletproof glass, how can we order?

We just need the actual dimension of the frame (inside diameter), then we will make to the exact size.

(Back to TOP)

 

34. Seems the Bulletproof glass comes with stainless steel frame, how can we install it to our existing window.

You can either weld it to the existing steel frame or concrete it or make another frame to hold it.

(Back to TOP)

 

35. If the customer require bulletproof level without changing the glass or require messy renovation, how can we do it?

No worry, we can teach and guide you in increasing the glass thickness without the need to change the glass, does not require renovation as well.

Installation make simple, clean and fast.

(Back to TOP)

 

36. How can we order the bulletproof sheet? In piece form?

Yes, BS model only comes in sheet form. For order, you can either choose our standard size or custom size.

(Back to TOP)

 

37. If we require bigger size then the standard size, would it be possible? Sheet, Shield and Glass.

Yes, possible. but the minimum order must be at least 10 sheets.

(Back to TOP)

 

38. Seems the bulletproof sheet is quite thick, what are the device we need to us for cutting.

You can use good quality and shape stationary knife of even a Makita with diamond cutter.

(Back to TOP)

 

39. The bulletproof sheet, after we cut into shape, we just need to use water and spray on the adhesive layer and stick it?

Yes, after stick, please use squeezer to squeeze the water out by hard force.

(Back to TOP)

 

40. Is the any color for the bulletproof sheet?

Yes, upon request, Black, Grey or any color depends on availability.

(Back to TOP)

 

41. As for the bulletproof shield, the standard size is 1.2mx1m, is it enough to cover for the whole car?

1.2mx1.6m is only enough to cover for TWO car door.

(Back to TOP)

 

42. Please advise what are the device we can use to cut the bulletproof shield into shape?

You can use diamond cutter with Makita to cut into the shape you require.

(Back to TOP)

 

43. After cut into shape of the BPS, how we could install into the car door?

The are 2 options and these 2 options can either use on each or both.

a. Drill hole to suit the existing car door screw and screw in.

b. Use metal to plastic adhesive to bind it to the door body.

(Back to TOP)

 

44. Can the BPS material install at the car roof or rear door (5th door)?

Yes. The process is the same as 43.

(Back to TOP)

 

45. How we could use the BPS for other purpose such as Chemical storage cabinet, wall or room?

For other purpose, just place the BPS in between wall of any. 2 panel of wall squeeze the BPS in between.

(Back to TOP)

 

46. Can we order bigger size for the bulletproof glass such as 4 x 8 feet?

Yes. But the quantity of at least 10 pieces.

(Back to TOP)

 

47. Seems the glass comes with frame, how could we install it.

You can either weld the glass frame to the window frame (in this method, you need to have another steel frame covering the window.

2nd is too concrete the whole glass frame into the cement wall.

(Back to TOP)

 

48. Is the dimension, for example 4 x 8 include frame?

No. The basic dimension is only the glass. The thickness of the stainless steel frame is 3mm on each edge / side.

(Back to TOP)

 

49. Is there any color available for example dark, gray or green?

Yes. Upon request.

(Back to TOP)

 

50. If you require other frame rather then stainless steel, would it be possible?

Yes, possible. Please send us the design and material require.

(Back to TOP)

 

51. If we do not wish to dismantle the current window frame or glass, can we install the bulletproof glass as additional protection.

Yes, weld another panel to extend the glass frame and then screw it to the wall or weld the glass frame to the existing window frame.

(Back to TOP)

 

52. If we require the bulletproof glass to make it a door, would it be possible to comes with the lock?

Yes, possible. Send us the detail of lock you require. If you have in our local market, we will install the lock for you.

If not, you can send the lock to us.

(Back to TOP)

 

 

If we have more questions from customer, we will list it here from time to time for your perusal.

 

 

Any other questions are welcome. Please send your questions to: info@securityfilm.biz.

(Back to TOP)